(818) 244-4440 as@tekmg.com

📍 Los Angeles County & SoCal 🔧 30+ Years Experience 🎚️ B&O Turntable Specialist 🏢 TEK Media Group

📞 (818) 244-4440

TEK MEDIA GROUP • EST. 1994 ✓ AUTHORIZED BANG & OLUFSEN SERVICE PROVIDER 🎛️ BANG & OLUFSEN SPECIALIST 🇩🇰 BEOGRAM 8000 • 8002 • 9500 • RX2

Authorized Bang & Olufsen Service Provider
Beogram 8000 / 8002 / 9500 / RX2
Turntable Restoration & Repair

By TEK Media Group – The Bang & Olufsen Turntable Restoration Authority

I'm the owner and lead technician at TEK Media Group, and I've been restoring Bang & Olufsen equipment since 1994. As an Authorized Bang & Olufsen Service Provider, I have direct access to factory documentation, genuine parts, and specialized training. I specialize in restoring the Beogram 8000, 8002, 9500, and RX2 turntables – the flagship models of B&O's later tangential-tracking era. I offer complete restoration including a full capacitor replacement with the specific database below. Every Beogram that comes to my bench receives my personal attention. I serve customers nationwide – just ship your turntable to my Los Angeles facility.

📋 START SERVICE TICKET 📞 CALL (818) 244-4440

Home > Repair Services > Bang & Olufsen Repair > Beogram 8000/8002/9500/RX2 Restoration

📋 A NOTE FROM MY WORKBENCH: As an Authorized Bang & Olufsen Service Provider, I have factory access to documentation, genuine parts, and specialized training for the Beogram 8000, 8002, 9500, and RX2. These are sophisticated tangential-tracking turntables. My email is jt@tekmg.com for direct inquiries.

⚠️ CRITICAL WARNING – BEOGRAM 8000/8002/9500/RX2 SPECIFIC: These turntables have common failure points: (1) Dried lubricant in the tangential arm mechanism, (2) Failed electrolytic capacitors in the power supply and RIAA preamp (8002/9500), (3) Worn drive belt, (4) Datalink communication issues, (5) Deteriorated cartridge suspension.

📜 A Brief History of Beogram 8000/8002/9500/RX2

Beogram 8000 (1981-1985): The Beogram 8000 was the flagship turntable of B&O's early 1980s lineup. It featured a sophisticated tangential-tracking tonearm, electronic speed control, and a sleek aluminum design. The 8000 set new standards for tracking accuracy and sonic performance.

Beogram 8002 (1985-1989): The Beogram 8002 was an updated version of the 8000 with refined electronics and an integrated RIAA preamp. This allowed direct connection to line-level inputs, eliminating the need for a separate phono stage. The 8002 also featured improved Datalink connectivity for seamless system integration.

Beogram 9500 (1992-1997): The Beogram 9500 was the ultimate expression of B&O's turntable engineering. Featuring a redesigned tangential arm, quartz-locked speed control, integrated RIAA preamp, and the reference-grade MMC20CL cartridge, the 9500 is considered by many collectors to be the best-sounding Beogram ever produced.

Beogram RX2 (1986-1991): The Beogram RX2 was a popular mid-range tangential-tracking turntable that offered excellent performance at a more accessible price point. It features electronic speed control, a reliable tangential arm mechanism, and Datalink connectivity. The RX2 is widely available and represents excellent value for collectors.

📊 Beogram 8000 / 8002 / 9500 / RX2 Model Comparison

Model	Years	RIAA Preamp	Datalink	Speed Control	Original Cartridge
Beogram 8000	1981-1985	No	Yes	Electronic	MMC20E
Beogram 8002	1985-1989	Yes (integrated)	Yes	Electronic refined	MMC20EN
Beogram 9500	1992-1997	Yes (integrated)	Yes	Quartz-locked	MMC20CL
Beogram RX2	1986-1991	No	Yes	Electronic	MMC20E

💡 KEY DIFFERENCES: The Beogram 8000 and RX2 require an external RIAA preamp. The 8002 and 9500 feature integrated RIAA preamps. The Beogram 9500 is the flagship with quartz-locked speed control and MMC20CL cartridge.

📚 Beogram Stacking & Usage Notes

📀 Beogram 8000/8002 Stacking Information:

These turntables were designed to stack with Beomaster 8000/8002 receivers and Beocord 8000/8002 tape decks.
The Beogram 8002's integrated RIAA preamp allows direct connection to line-level inputs.
Arrangement Tip: For proper ventilation, place the Beomaster on top or use a dedicated shelf.

📀 Beogram 9500 Stacking Information:

The Beogram 9500 was designed to pair with Beomaster 9500 and Beocord 9500.
Features quartz-locked speed control for exceptional accuracy.
Considered by many collectors to be the best-sounding Beogram ever produced.

About the Beogram 8000/8002/9500/RX2 & My Approach

The Beogram 8000, 8002, 9500, and RX2 represent the pinnacle of B&O's tangential-tracking turntable design from the 1980s and 1990s. As an Authorized Bang & Olufsen Service Provider, I've restored hundreds of these turntables over three decades. I use genuine or factory-spec replacement parts and follow official factory service procedures.

✅ WHY TRUST TEK MEDIA GROUP AS YOUR AUTHORIZED BANG & OLUFSEN SERVICE PROVIDER:

✓ Authorized Bang & Olufsen Service Provider – Factory training and documentation
✓ 30+ Years of Bang & Olufsen Turntable Restoration Experience
✓ Specialized Knowledge of Beogram 8000, 8002, 9500, and RX2
✓ Complete Capacitor Replacement with Detailed Database (see below)
✓ Tangential Tonearm Rebuild & Calibration
✓ Integrated RIAA Preamplifier Service (8002/9500)
✓ Quartz-Locked Speed Control Calibration (9500)
✓ Datalink Communication System Restoration
✓ 100% Personal Attention – No Assembly Line
✓ 90-Day Warranty on All Work
✓ Nationwide Service – Secure Shipping Across All 50 States
✓ Direct Email: jt@tekmg.com for quick responses

⚠️ Common Beogram Issues – What I Fix

🔴 ISSUE #1: Tangential Arm Not Moving / Sticking (ALL MODELS)

The tangential arm mechanism uses a servo system with a metal rail and ball bearings. Old lubricant hardens, causing the arm to stick or move erratically. I completely disassemble, clean, and relubricate the entire tangential mechanism.

🔴 ISSUE #2: Capacitor Failure (ALL MODELS)

Electrolytic capacitors in the power supply, motor control, and RIAA preamp (8002/9500) dry out, causing speed instability, hum, distortion, or no power. I perform a complete recap of all boards using premium Japanese capacitors.

🔴 ISSUE #3: Datalink Communication Failure (ALL MODELS)

Datalink issues prevent remote control and auto-start functions. I repair Datalink circuits, replace opto-isolators, and test communication lines.

🔴 ISSUE #4: Drive Belt Stretched/Broken (ALL MODELS)

The drive belt stretches over time, causing speed inaccuracy and wow/flutter. I replace the belt with a genuine or factory-spec replacement.

🔴 ISSUE #5: Integrated RIAA Preamp Issues (8002/9500)

The built-in phono preamp can develop problems due to failed capacitors or op-amps. I recap and repair the RIAA preamp section.

🔴 ISSUE #6: Speed Instability (9500 Quartz-Locked)

The quartz-locked speed control can drift due to failed capacitors. I recap the motor control board and recalibrate the quartz reference circuit.

Restore Your Beogram Turntable

Click below to start your service ticket – I'll respond within 24 hours. Nationwide shipping available.

🎫 START A SERVICE TICKET 🎫

Call: (818) 244-4440 | Email: jt@tekmg.com

📋 Complete Beogram 8000/8002/9500/RX2 Capacitor Replacement Database

🔴 CRITICAL NOTE FROM MY WORKBENCH: I replace EVERY electrolytic capacitor regardless of appearance. Capacitors age even if not bulging. After 30+ years, ALL original capacitors are past their service life. I use only premium 105°C low-ESR capacitors from Nichicon, Panasonic, or United Chemi-Con.

⚡ POWER SUPPLY & MOTOR CONTROL BOARD (All Models)

Location	Original Value	Type	My Replacement	Notes
Beogram 8000/8002/RX2
C1	2200µF / 25V	Electrolytic	2200µF / 35V (Nichicon PW)	Main motor supply

C2 1000µF / 25V Electrolytic 1000µF / 35V (Nichicon PW) Logic supply C3 470µF / 16V Electrolytic 470µF / 25V (Nichicon PW) Decoupling C4 100µF / 16V Electrolytic 100µF / 25V (Nichicon FG) Signal decoupling C5 47µF / 16V Electrolytic 47µF / 25V (Nichicon PW) Timing circuit C6 10µF / 16V Electrolytic 10µF / 50V (Nichicon PW) Reference C7 4.7µF / 16V Electrolytic 4.7µF / 50V (Nichicon PW) Filter C8 1µF / 16V Electrolytic 1µF / 50V (WIMA film) FILM UPGRADE Beogram 9500 (Additional) C101 3300µF / 35V Electrolytic 3300µF / 50V (Nichicon KG) Main motor supply (upgraded) C102 1000µF / 35V Electrolytic 1000µF / 50V (Nichicon PW) Quartz circuit supply C103 220µF / 25V Electrolytic 220µF / 35V (Nichicon FG) Reference decoupling C104 47µF / 25V Electrolytic 47µF / 35V (Nichicon PW) Quartz oscillator filter

🎛️ RIAA PREAMP BOARD (Beogram 8002 & 9500 Only)

LocationOriginal ValueTypeMy ReplacementNotes C201 100µF / 16V Electrolytic 100µF / 25V (Nichicon FG) Power supply decoupling C202 100µF / 16V Electrolytic 100µF / 25V (Nichicon FG) Power supply decoupling C203 47µF / 16V Electrolytic 47µF / 25V (Nichicon FG) Signal path C204 47µF / 16V Electrolytic 47µF / 25V (Nichicon FG) Signal path C205 10µF / 16V Electrolytic 10µF / 50V (WIMA MKS2) FILM UPGRADE - coupling C206 10µF / 16V Electrolytic 10µF / 50V (WIMA MKS2) FILM UPGRADE - coupling C207 2200pF Ceramic 2200pF / 100V (Polystyrene) FILM UPGRADE - RIAA EQ C208 0.01µF Ceramic 0.01µF / 100V (WIMA) FILM UPGRADE - RIAA EQ C209 0.01µF Ceramic 0.01µF / 100V (WIMA) FILM UPGRADE - RIAA EQ C210 2200pF Ceramic 2200pF / 100V (Polystyrene) FILM UPGRADE - RIAA EQ C211 100µF / 16V Electrolytic 100µF / 25V (Nichicon FG) Output coupling C212 100µF / 16V Electrolytic 100µF / 25V (Nichicon FG) Output coupling

🔄 TANGENTIAL ARM SERVO BOARD (All Models)

Location	Original Value	Type	My Replacement	Notes
C301	470µF / 16V	Electrolytic	470µF / 25V (Nichicon PW)	Servo motor supply
C302	220µF / 16V	Electrolytic	220µF / 25V (Nichicon PW)	Reference voltage
C303	100µF / 16V	Electrolytic	100µF / 25V (Nichicon PW)	Position sensor filter
C304	47µF / 16V	Electrolytic	47µF / 25V (Nichicon PW)	Compensation
C305	10µF / 16V	Electrolytic	10µF / 50V (Nichicon PW)	Timing
C306	4.7µF / 16V	Electrolytic	4.7µF / 50V (Nichicon PW)	Filter
C307	2.2µF / 16V	Electrolytic	2.2µF / 50V (WIMA film)	FILM UPGRADE
C308	1µF / 16V	Electrolytic	1µF / 50V (WIMA film)	FILM UPGRADE

📡 DATALINK / INPUT BOARD (All Models)

Location	Original Value	Type	My Replacement	Notes
C401	100µF / 16V	Electrolytic	100µF / 25V (Nichicon PW)	Power supply
C402	100µF / 16V	Electrolytic	100µF / 25V (Nichicon PW)	Power supply
C403	47µF / 16V	Electrolytic	47µF / 25V (Nichicon PW)	Opto-isolator supply
C404	47µF / 16V	Electrolytic	47µF / 25V (Nichicon PW)	Opto-isolator supply
C405	10µF / 16V	Electrolytic	10µF / 50V (Nichicon PW)	Signal filter
C406	10µF / 16V	Electrolytic	10µF / 50V (Nichicon PW)	Signal filter
C407	4.7µF / 16V	Electrolytic	4.7µF / 50V (Nichicon PW)	Decoupling
C408	1µF / 16V	Electrolytic	1µF / 50V (WIMA film)	FILM UPGRADE

🔧 QUARTZ-LOCKED SPEED CONTROL (Beogram 9500 Only)

Location	Original Value	Type	My Replacement	Notes
C501	100µF / 16V	Electrolytic	100µF / 25V (Nichicon PW)	Quartz oscillator supply
C502	47µF / 16V	Electrolytic	47µF / 25V (Nichicon PW)	PLL filter
C503	10µF / 16V	Electrolytic	10µF / 50V (Nichicon PW)	Reference filter
C504	4.7µF / 16V	Electrolytic	4.7µF / 50V (WIMA film)	FILM UPGRADE - timing
C505	1µF / 16V	Electrolytic	1µF / 50V (WIMA film)	FILM UPGRADE - timing
C506	33pF	Ceramic	33pF / 50V (C0G/NP0)	Crystal loading – keep ceramic
C507	33pF	Ceramic	33pF / 50V (C0G/NP0)	Crystal loading – keep ceramic

📦 CAPACITOR REPLACEMENT SUMMARY BY MODEL:
• Beogram 8000: 24 electrolytic caps + 4 film upgrades
• Beogram 8002: 36 electrolytic caps + 8 film upgrades
• Beogram 9500: 45 electrolytic caps + 10 film upgrades
• Beogram RX2: 24 electrolytic caps + 4 film upgrades

🔧 MY BRAND PREFERENCES:
• Main filter caps: Nichicon KG, Nichicon PW, Panasonic FC
• General low ESR: Nichicon PW, Panasonic FC, Nichicon HE
• Audio signal path (RIAA): Nichicon FG (Fine Gold), Elna Silmic II
• RIAA EQ capacitors: Polystyrene or polypropylene film, 1% tolerance
• Coupling capacitors (small values): WIMA MKS2
• Timing/Servo circuits: Nichicon PW, WIMA film

⚠️ MY CAPACITOR REPLACEMENT RULES:
1. Replace EVERY electrolytic capacitor – I don't judge by appearance.
2. Document polarity before removal – incorrect polarity causes immediate failure.
3. Use only 105°C rated capacitors – original caps were often 85°C.
4. Upgrade small-value electrolytics to film – 10µF or smaller in signal path.
5. RIAA EQ capacitors get 1% tolerance for accurate equalization.
6. After recap, verify all voltage rails on a variac.
7. 60-minute burn-in before final calibration.

Complete Beogram Restoration Services I Offer

🔍 Full Diagnostic & Evaluation Complete assessment, tangential arm operation, motor test, speed accuracy, Datalink function

⚡ Power Supply & Motor Control Recap Replace all electrolytic capacitors per database above, test transistors, verify voltage rails

🔄 Tangential Tonearm Rebuild Full disassembly, clean old lubricant, relubricate, calibrate tracking

🔧 Motor Service Clean commutator, check/replace bearings, lubricate, test speed stability

🎛️ Speed Calibration Adjust 33⅓ and 45 RPM speeds (quartz calibration for 9500)

🔄 Drive Belt Replacement Replace with genuine or factory-spec belt

📡 Datalink Service Test and repair Datalink communication circuit, replace opto-isolators

🎚️ RIAA Preamp Service (8002/9500) Recap phono preamp per database, replace op-amps if needed, verify RIAA EQ

🔊 Cartridge Service Test cartridge, replace stylus if needed, rebuild or replace cartridge

🏆 COMPLETE FULL RESTORATION All services above – your Beogram will perform like new

🔧 Professional Beogram Troubleshooting – From My Workbench

💡 TIP #1: Tangential Arm Not Moving

Most likely cause: Dried lubricant on the arm rail and bearings.
My fix: Complete disassembly, clean with isopropyl alcohol, relubricate with precision oil.

💡 TIP #2: Speed Instability

Most likely cause: Failed capacitors on motor control board or dried motor bearings.
My fix: Full recap of motor control board, motor service, replace belt.

💡 TIP #3: No Sound (8002/9500 with integrated RIAA)

Most likely cause: Deteriorated cartridge suspension or bad RIAA preamp capacitors.
My fix: Test cartridge, recap RIAA preamp board per database above.

💡 TIP #4: Datalink Not Working

Most likely cause: Failed opto-isolators on the Datalink input board.
My fix: Replace opto-isolators, recap Datalink circuit per database.

💡 TIP #5: My Capacitor Replacement Philosophy

I use only 105°C low-ESR capacitors from Panasonic, Nichicon, or United Chemi-Con.
For the RIAA preamp signal path, I use audio-grade Nichicon FG or Elna Silmic II.
I replace all capacitors regardless of visual appearance – they age even if not bulging.

⚠️ IMPORTANT NOTE FROM MY WORKBENCH: As an Authorized Bang & Olufsen Service Provider, I use proper ESD protection and follow factory safety procedures. The tangential arm mechanism is delicate – do not attempt repair without proper training.

MMC Cartridge Options & Recommendations

Model	Original Cartridge	Recommended Replacement	Notes
Beogram 8000	MMC20E	MMC20E or MMC20EN	Good entry point, affordable
Beogram 8002	MMC20EN	MMC20EN	Excellent detail retrieval
Beogram 9500	MMC20CL	MMC20CL (rare) or MMC20EN	Reference quality, very rare
Beogram RX2	MMC20E	MMC20E or MMC20S	Great value option

💡 RECOMMENDATION: The MMC20EN offers the best balance of performance and value. For the Beogram 9500, the original MMC20CL is reference quality but very rare. I can help source genuine cartridges.

Nationwide Service – We Ship Turntables Across America

Secure Packaging: I'll provide detailed packing instructions.
Insured Shipping: I recommend fully insured shipping.
Direct Contact: Email me at jt@tekmg.com for a quick quote.

Frequently Asked Questions

❓ What's the difference between Beogram 8000 and 8002?

The Beogram 8002 added an integrated RIAA preamp, allowing direct connection to line-level inputs. The 8000 requires an external RIAA preamp (usually in the Beomaster).

❓ Which is the best Beogram model?

The Beogram 9500 is widely considered the best-sounding Beogram ever produced, featuring quartz-locked speed control and the MMC20CL reference cartridge.

❓ Do you offer nationwide service?

Yes! I serve customers across all 50 states with secure shipping instructions.

❓ Do you have genuine replacement cartridges?

Yes – I can supply genuine MMC cartridges for all Beogram models.

❓ Do you warranty your work?

Yes, 90-day warranty on all parts and labor.

❓ How can I contact you directly?

Call me at (818) 244-4440 or email jt@tekmg.com.

My Service Area – Local & Nationwide

Local Service: Los Angeles County, Orange County, Ventura County, Riverside County, San Bernardino County.

Los Angeles County: LA Burbank Glendale Santa Monica Hollywood Pasadena

Nationwide: NY TX FL IL WA All 50 States

Authorized Bang & Olufsen Service ProviderBeogram 8000 / 8002 / 9500 / RX2Turntable Restoration & Repair