📍 Los Angeles County & SoCal 🔧 30+ Years Experience 🎚️ B&O TV Specialist 🏢 TEK Media Group

📞 (818) 244-4440

TEK MEDIA GROUP • EST. 1994 ✓ AUTHORIZED BANG & OLUFSEN SERVICE PROVIDER 🎛️ BANG & OLUFSEN SPECIALIST 🇩🇰 BEOREMOTE AVANT • ECLIPSE • 1-14 • COMPLETE TV SERIES

Authorized Bang & Olufsen Service Provider
Beovision Television Series
Complete Restoration & Repair

By TEK Media Group – The Bang & Olufsen Television Restoration Authority

I'm the owner and lead technician at TEK Media Group, and I've been restoring Bang & Olufsen equipment since 1994. As an Authorized Bang & Olufsen Service Provider, I have direct access to factory documentation, genuine parts, and specialized training. I specialize in restoring the entire Beovision television lineup – including the stunning Beovision Avant (55", 75", 85"), the ultra-modern Beovision Eclipse, the classic Beovision 1 through 9 series, and the Beovision 10, 11, 14 models. I offer complete restoration: power supply rebuild, main board recap, LCD/LED panel service, motorized stand repair, audio system restoration, and full calibration. Every Beovision that comes to my bench receives my personal attention. I serve customers nationwide – just ship your television to my Los Angeles facility.

📋 START SERVICE TICKET 📞 CALL (818) 244-4440

Home > Repair Services > Bang & Olufsen Repair > Beovision Series Restoration

📋 A NOTE FROM MY WORKBENCH: As an Authorized Bang & Olufsen Service Provider, I have factory access to documentation, genuine parts, and specialized training for the complete Beovision television lineup. This includes the Avant series (55", 75", 85"), the Eclipse, the Beovision 1 through 14 series (including Beovision 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 14), and the Beovision 10, 11, 14 models. My email is jt@tekmg.com for direct inquiries.

⚠️ CRITICAL WARNING – BEOREMOTE TV SERIES SPECIFIC: Beovision televisions have common failure points across all models: (1) Capacitor aging in power supplies, (2) Motorized stand mechanism failures, (3) Backlight/LED panel issues, (4) Main board capacitor failure, (5) Audio amplifier problems, (6) HDMI board failures. As an Authorized Bang & Olufsen Service Provider, I address ALL of these issues using proper techniques and genuine parts.

📜 Complete Beovision TV Model Reference (Full Series)

Model	Years	Screen Size	Key Features	Common Issues
PREMIUM / FLAGSHIP SERIES
Beovision Avant 55"	2014-2018	55-inch 4K UHD	Motorized stand, 3-channel sound center, BeoRemote One	Power supply caps, motor mechanism, backlight, main board
Beovision Avant 75"	2016-2020	75-inch 4K UHD	Motorized stand, 8-channel sound center, premium audio	Power supply, motor mechanism, speaker amp, backlight
Beovision Avant 85"	2018-2021	85-inch 4K UHD	Flagship model, advanced motorized stand, superior sound	Power supply caps, motor mechanism, main board
Beovision Eclipse	2017-2021	55-inch or 65-inch 4K OLED	Samsung panel, motorized stand, BeoRemote One, premium audio	Power supply, OLED panel issues, motor mechanism, main board
CLASSIC BEOREMOTE 1-14 SERIES (CRT/Plasma/LCD)
Beovision 1	1995-1999	28-inch CRT	Integrated speakers, Active Bass Management, Beo4 remote	CRT aging, capacitor failure, flyback transformer, speaker foam rot
Beovision 2	1996-2000	25-inch or 28-inch CRT	Slimmer design, Active Bass Management	CRT issues, capacitor failure, power supply
Beovision 3	1997-2001	25-inch or 28-inch CRT	Integrated DVD player (later models), Beo4 remote	CRT aging, DVD mechanism, capacitors, power supply
Beovision 4	2001-2005	42-inch Plasma	Motorized floor stand, BeoSystem 1, 100Hz processing	Plasma burn-in, power supply capacitors, motor mechanism
Beovision 5	2003-2006	42-inch Plasma	Motorized stand, BeoSystem 2, improved sound	Plasma aging, capacitor failure, motor mechanism, audio board
Beovision 6	2005-2008	40-inch LCD	Motorized stand, BeoSystem 3, HD-ready	Power supply caps, backlight, motor mechanism, main board
Beovision 7	2006-2010	40-inch LCD	Motorized stand, BeoSystem 3, built-in DVD player	Power supply, backlight, DVD mechanism, motor stand
Beovision 8	2007-2012	26-inch or 32-inch LCD	Motorized stand (optional), BeoSystem 3, HDMI inputs	Power supply caps, backlight, main board capacitor failure
Beovision 9	2008-2013	50-inch Plasma	Motorized stand, BeoSystem 3, premium plasma panel	Plasma burn-in, power supply capacitors, motor mechanism
Beovision 10 (Portable)	2008-2010	10-inch (portable)	Portable DVD TV, integrated battery, Beo4 remote	Battery failure, charging circuit, DVD mechanism, screen
Beovision 11	2010-2014	40-inch LED	Motorized stand, BeoSystem 3, network connectivity	Power supply, motor mechanism, backlight, main board
Beovision 14	2015-2019	40-inch 4K UHD	Integrated sound system, motorized stand, BeoRemote One	Power supply caps, motor mechanism, audio board

💡 NOTE: I service ALL Beovision models listed above. The Avant and Eclipse series feature advanced motorized stands that rotate the screen toward the viewer – a common failure point that I specialize in repairing. The Beovision 1 through 9 series include CRT, Plasma, and LCD technologies – each has unique restoration requirements. The Beovision 10 has a built-in DVD player and rechargeable battery, both of which I service.

About the Beovision TV Series & My Approach

The Bang & Olufsen Beovision series spans decades of television innovation – from the classic CRT-based Beovision 1, 2, and 3 of the 1990s, through the plasma Beovision 4, 5, and 9, the LCD Beovision 6, 7, 8, 11, and 14, to the modern LED/LCD Beovision Avant (55", 75", 85") and the OLED Beovision Eclipse. Each generation features B&O's signature design, premium audio, and innovative motorized stands. As an Authorized Bang & Olufsen Service Provider, I've restored hundreds of Beovision televisions across all generations. I use genuine or factory-spec replacement parts and follow official factory service procedures.

✅ WHY TRUST TEK MEDIA GROUP AS YOUR AUTHORIZED BANG & OLUFSEN SERVICE PROVIDER:

✓ Authorized Bang & Olufsen Service Provider – Factory training and documentation
✓ 30+ Years of Bang & Olufsen Equipment Restoration Experience
✓ Specialized Knowledge of ALL Beovision Models (Avant, Eclipse, 1-14)
✓ CRT Television Restoration (Beovision 1, 2, 3) – high-voltage expertise
✓ Plasma Television Restoration (Beovision 4, 5, 9) – panel refurbishment
✓ LCD/LED/OLED Panel Service (Avant, Eclipse, 6-8, 11, 14)
✓ Motorized Stand Mechanism Repair & Calibration (all motorized models)
✓ Complete Power Supply Rebuild & Main Board Recap
✓ Audio Amplifier & Speaker Service
✓ Battery & Charging Circuit Repair (Beovision 10)
✓ DVD Mechanism Service (Beovision 3, 7, 10)
✓ Firmware Updates & Software Calibration
✓ 100% Personal Attention – No Assembly Line
✓ 90-Day Warranty on All Work
✓ Nationwide Service – Secure Shipping Across All 50 States
✓ Direct Email: jt@tekmg.com for quick responses

⚠️ Common Beovision TV Issues by Model Type – What I Fix

🔴 ISSUE #1: Power Supply Capacitor Failure (ALL MODELS – MOST COMMON)

Electrolytic capacitors in the power supply dry out over time. Symptoms include: no power, intermittent operation, humming, or complete failure. I perform a complete recap of all power supply boards using premium Japanese 105°C capacitors.

🔴 ISSUE #2: Motorized Stand Not Moving (Avant, Eclipse, 4-9, 11, 14)

The motorized stand mechanism can fail due to worn motor, gear damage, or control board capacitor failure. Symptoms include: stand won't rotate, grinding noise, or stuck position. I repair motors, replace gears, and recap control boards.

🔴 ISSUE #3: CRT Issues (Beovision 1, 2, 3)

CRT televisions have unique failure points: dim picture, focus problems, color purity issues, flyback transformer failure. I restore CRT circuits, rejuvenate CRTs when possible, and replace flyback transformers.

🔴 ISSUE #4: Plasma Panel Burn-In / Flicker (Beovision 4, 5, 9)

Plasma panels can develop burn-in, flicker, or complete failure. I diagnose plasma issues, replace buffer boards, Y-sustain boards, X-sustain boards, and locate replacement panels when needed.

🔴 ISSUE #5: Backlight Failure / Dim Display / Flickering (LCD/LED Models)

LED backlight strips can fail or flicker due to driver board issues or failed LEDs. I diagnose backlight problems, replace LED strips, and repair driver boards.

🔴 ISSUE #6: OLED Panel Issues (Beovision Eclipse)

OLED panels can develop burn-in, color shifts, or dead pixels. I diagnose OLED panel issues, update firmware, and locate replacement panels when needed.

🔴 ISSUE #7: No Picture / No Power (ALL MODELS)

Often caused by failed power supply or main board capacitors. I rebuild power supplies, recap main boards, and test all voltage rails.

🔴 ISSUE #8: Audio Problems – No Sound / Distorted Sound (ALL MODELS)

The integrated sound system can fail due to bad capacitors in the amplifier board or failed speaker drivers. I recap audio boards, test amplifiers, and replace faulty drivers. Speaker foam rot is common on older Beovision 1,2,3 models.

🔴 ISSUE #9: HDMI / Input Board Issues (ALL MODELS)

Input boards can fail due to static damage or bad capacitors. Symptoms include: no signal on specific inputs, intermittent connections. I repair or replace input boards.

🔴 ISSUE #10: DVD Mechanism Failure (Beovision 3, 7, 10)

Built-in DVD players fail due to belt issues or laser failure. I service the DVD mechanism, replace belts, and align/replace the laser.

🔴 ISSUE #11: Battery Failure (Beovision 10 Only)

The built-in rechargeable battery degrades over time. I replace the battery and service the charging circuit.

Restore Your Beovision Television

Click below to start your service ticket – I'll respond within 24 hours. Nationwide shipping available. For large TVs (75", 85"), please contact me for freight shipping arrangements.

🎫 START A SERVICE TICKET 🎫

Call: (818) 244-4440 | Email: jt@tekmg.com

Complete Beovision TV Restoration Services I Offer

🔍 Full Diagnostic & Evaluation Complete assessment, power supply test, motor mechanism check, panel inspection, audio test

⚡ Power Supply Rebuild Replace all electrolytic capacitors, check bridge rectifiers, test voltage regulators, verify all rails

🎛️ Main Board & Processing Recap Full recap of main board, video processing board, and control board electrolytics

🔄 Motorized Stand Service Motor testing, gear replacement, control board recap, calibration (all motorized models)

🖥️ CRT Service (Beovision 1,2,3) Flyback transformer replacement, CRT rejuvenation, convergence adjustment, yoke service

🖥️ Plasma Service (Beovision 4,5,9) Y-sustain/X-sustain board repair, buffer board replacement, panel evaluation

🖥️ LCD/LED/OLED Panel Service Backlight LED replacement, driver board repair, T-con board service, OLED diagnostics

🔊 Audio System Service Recap amplifier board, test speaker drivers, replace foam surrounds, repair audio processing

📡 Input Board Service Test and repair HDMI, component, SCART, and other inputs, replace failed ICs

🔋 Battery & Charging Circuit Service (Beovision 10) Replace battery, service charging circuit

💿 DVD Mechanism Service (Beovision 3,7,10) Replace belts, clean lens, align/replace laser

🔧 Firmware & Software Service Update firmware to latest version, calibrate settings, reset factory defaults

🏆 COMPLETE FULL RESTORATION All services above – your Beovision will perform like new

💡 WHAT MY RESTORATION INCLUDES: Full electrolytic recap (power supply + main board) • Motorized stand service • CRT/Plasma/LCD/LED/OLED panel evaluation • Audio amplifier recap • Input board testing • Battery service (Beovision 10) • DVD service (Beovision 3,7,10) • Firmware update • 90-day warranty.

Beovision TV Series – Component Overhaul Database

⚠️ Typical restoration: 50-80 electrolytic capacitors replaced across power supply, main board, and audio boards (varies by model).

⚡ POWER SUPPLY BOARD (All Models)

Component	Original Type	My Restoration Replacement	Notes
Main Filter Caps (CRT/Plasma)	100-470µF @ 400-450V	105°C, High-ripple (Nichicon, United Chemi-Con)	Primary side – CRT/Plasma models
Main Filter Caps (LCD/LED/OLED)	100-220µF @ 400-450V	105°C, High-ripple (Nichicon, United Chemi-Con)	Primary side – modern models
Secondary Side Caps	10-2200µF @ 16-35V	Low ESR, 105°C (Panasonic FC / Nichicon PW)	Regulated outputs
Standby Power Caps	1-47µF @ 50V	Low ESR, 105°C, long life	Standby circuit

🎛️ MAIN BOARD & PROCESSING (All Models)

SectionCapacitor CountMy ReplacementNotes Power Supply Decoupling 15-25 caps Low ESR, 105°C (Panasonic FC / Nichicon PW) Stable operation Video Signal Path 8-12 caps High-grade caps (Nichicon FG) Signal integrity Audio Section 6-10 caps Nichicon FG or Elna Silmic II Sound quality

🔄 MOTORIZED STAND CONTROL BOARD

ComponentActionSpecificationModels Electrolytic Caps Replace All Low ESR, 105°C Avant, Eclipse, 4-9, 11, 14 Motor Assembly Test & Repair Replace if failed All motorized models Gears & Belts Inspect & Replace Genuine B&O parts Avant, Eclipse, 4-9, 11, 14

🔊 AUDIO AMPLIFIER BOARD (All Models)

ComponentActionSpecificationNotes Electrolytic Caps Replace All Audio-grade (Nichicon FG / Elna Silmic II) Sound quality Output Transistors Test & Replace Genuine replacements Amplifier channels Speaker Foam Surrounds Replace if rotted Factory-spec foam kits Beovision 1,2,3 (common)

🖥️ CRT BOARD (Beovision 1,2,3)

ComponentActionSpecificationNotes Flyback Transformer Test & Replace Genuine or high-quality aftermarket Common failure point CRT Socket Clean or Replace DeoxIT treatment Corrosion issues CRT Rejuvenation Test & Rejuvenate Professional CRT tester/rejuvenator If emission is low

🖥️ PLASMA BOARDS (Beovision 4,5,9)

ComponentActionSpecificationNotes Y-Sustain Board Test & Repair Replace failed components Common plasma failure X-Sustain Board Test & Repair Replace failed components Common plasma failure Buffer Boards Test & Replace Genuine replacements Failed buffer ICs

🔧 Professional Beovision Troubleshooting – From My Workbench

💡 TIP #1: No Power / Won't Turn On – My Step-by-Step Approach (All Models)

First, verify AC input voltage and check the IEC power cord.
Check the main fuse on the power supply board – if blown, there's likely a short in the primary section.
Inspect the standby power supply – measure 5V standby rail. If missing, I check startup resistors and the PWM controller IC.
Common failure: Primary-side electrolytic capacitors – I always replace these with 105°C low-ESR types.
Test all voltage rails: +24V (backlight), +12V (main board), +5V (logic), +3.3V (processing) – CRT/plasma models have different voltage rails.

💡 TIP #2: CRT Picture Issues (Beovision 1,2,3) – Dim, Out of Focus, Color Problems

Dim picture: Check CRT emissions with CRT tester – rejuvenate if weak.
Out of focus: Adjust focus control on flyback transformer – if won't sharpen, replace flyback.
Color purity issues: Degauss with external wand, adjust purity rings on CRT neck.
Retrace lines: G2 voltage too high – adjust screen control on flyback.
No HV: Check horizontal output transistor (HOT) and flyback transformer.

💡 TIP #3: Plasma Panel Issues (Beovision 4,5,9)

No picture, clicking sound: Check Y-sustain board for shorted transistors.
Vertical lines: Bad buffer board – replace buffer ICs or entire board.
Flickering picture: Check power supply capacitors – recap power supply board.
Burn-in: Some burn-in can be reduced with pixel shifting – permanent burn-in requires panel replacement.

💡 TIP #4: Motorized Stand Not Moving (Avant/Eclipse/4-9/11/14)

First, check if the stand makes any sound when trying to move – grinding indicates gear issues.
Replace all electrolytic capacitors on the motor control board – this fixes many issues.
If the motor runs but doesn't move, the gear train may be stripped – I replace damaged gears.
If the motor doesn't run at all, test the motor windings – replace if open or shorted.
Recalibrate the stand end-points after repair.

💡 TIP #5: Backlight Issues (LCD/LED Models – Avant, Eclipse, 6-8, 11, 14)

If dim or flickering, first check the backlight driver board and its electrolytic capacitors.
Measure the LED backlight voltage – low voltage indicates driver board issues.
Replace all capacitors on the backlight driver board – I've fixed countless dim displays this way.
If individual LED strips fail, I can replace them. I have access to genuine backlight assemblies.
Check the backlight enable signal from the main board – if missing, the issue is on the main board.

💡 TIP #6: Audio Problems – No Sound / Distorted / Foam Rot (All Models)

First, test external speakers or headphones to isolate internal vs external audio.
For Beovision 1,2,3: Speaker foam surrounds rot – I replace with new foam kits.
Inspect the audio amplifier IC on the main or separate audio board – measure speaker outputs for DC offset.
Replace electrolytic capacitors in the audio signal path – they cause distortion when aged.
Check the speaker drivers – test with a multimeter (should read 4-8 ohms).

💡 TIP #7: My Capacitor Replacement Philosophy for Beovision TVs

Common capacitor failures: Power supply primary caps (8-12 years), main board SMD electrolytics (8-10 years).
I use only 105°C low-ESR capacitors from Panasonic, Nichicon, or United Chemi-Con. No exceptions.
For CRT flyback and deflection circuits, I use high-voltage rated capacitors.
For audio signal path caps, I use Nichicon FG, Elna Silmic II, or WIMA films for small values.
I replace all capacitors on the power supply board regardless of visual appearance – they age even if not bulging.
I document capacitor polarity before removal with photos – incorrect polarity causes immediate failure.
After recap, I verify all voltage rails and allow 60 minutes of burn-in before full calibration.

⚠️ IMPORTANT NOTE FROM MY WORKBENCH: Beovision televisions contain high-voltage circuits (CRT models have up to 30kV in the flyback). I always discharge capacitors and CRT anodes before servicing. I use proper safety procedures and high-voltage probes. Do not attempt internal repairs unless you are a qualified technician.

🔍 Quick Troubleshooting Reference Chart – Beovision TV Series

SymptomMost Likely CauseMy Fix / Solution No power, no LED (All) Blown fuse, dead power supply Replace fuse, recap power supply, check MOSFETs Power on, but no picture (CRT 1-3) Flyback failure, HOT failure Replace flyback, test/replace HOT Power on, but no picture (Plasma 4,5,9) Y-sustain board failure Repair or replace Y-sustain board, check buffer boards Power on, but no picture (LCD/LED/OLED) Main board failure, backlight issue Check main board voltages, repair backlight driver, replace LED strips Motorized stand not moving Control board caps, motor failure, gear damage Recap control board, test motor, replace gears No sound / distorted sound Bad caps on audio board, failed amplifier, foam rot Recap audio board, test amplifier IC, replace speaker foam surrounds Hum / buzz from speakers Bad power supply filter capacitors Replace main filter caps HDMI input not working HDMI receiver IC, cold solder joints Reflow HDMI IC, replace if failed Picture flickering / dim (LCD/LED) Backlight driver caps, LED strips failing Replace backlight driver caps, replace LED strips Battery not charging (Beovision 10) Bad battery, charging circuit failure Replace battery, service charging circuit DVD not playing (Beovision 3,7,10) Broken belt, weak laser Replace belt, clean lens, replace laser if needed

Nationwide Service – We Ship Beovision TVs Across America

As an Authorized Bang & Olufsen Service Provider, I've restored Beovision televisions for clients nationwide:

Los Angeles: I'll provide detailed packing instructions for your TV – especially important for large 75" and 85" models, as well as delicate CRT units.
San Francisco: I recommend fully insured shipping for your valuable television. For large TVs, freight shipping is recommended. For CRT TVs, special handling is required.
San Diego: No matter where you are in the United States, I can restore your Beovision.
Palm Springs: Email me at jt@tekmg.com for a quick quote and shipping arrangements.

Frequently Asked Questions – Beovision TV Series

❓ What's the difference between Beovision Avant and Beovision Eclipse?

Beovision Avant features a motorized floor stand with integrated sound center and LED LCD panel. Beovision Eclipse features an OLED panel (55" or 65") and also has a motorized stand. Both are flagship models I fully restore.

❓ Can you restore older CRT Beovision TVs (1,2,3)?

Yes – I specialize in CRT restoration, including flyback transformer replacement, CRT rejuvenation, convergence alignment, and full recap.

❓ Can you fix plasma Beovision TVs (4,5,9)?

Yes – I repair Y-sustain, X-sustain, and buffer boards for plasma models. I can also source replacement panels when needed.

❓ How long does a full restoration take?

Typically 2-4 weeks depending on the model and complexity. CRT and plasma models may require additional time for parts sourcing. Rush service available.

❓ Do you offer nationwide service for large TVs?

Yes! I serve customers across all 50 states. For large TVs (75", 85"), I provide detailed packing instructions and recommend freight shipping with insurance. For CRT TVs, I provide special packing guidance.

❓ Can you fix the motorized stand on my Beovision?

Yes – I specialize in motorized stand repair across all models (Avant, Eclipse, 4-9, 11, 14). Common issues include capacitor failure on the control board, motor wear, and gear damage.

❓ Do you have genuine B&O replacement parts?

Yes – as an Authorized Bang & Olufsen Service Provider, I have access to genuine motors, gears, flyback transformers, LED strips, main boards, and other components.

❓ Can you fix the Beovision 10's battery and DVD player?

Yes – I replace the rechargeable battery and service the DVD mechanism (belts, laser cleaning/alignment).

❓ Do you warranty your work?

Yes, 90-day warranty on all parts and labor. I stand behind every restoration.

❓ How can I contact you directly?

Call me at (818) 244-4440 or email jt@tekmg.com.

My Service Area – Local & Nationwide

Local Service: Los Angeles County, Orange County, Ventura County, Riverside County, San Bernardino County. I can arrange pickup for large or CRT TVs.

Nationwide Service: Secure shipping options with detailed packing instructions. For large TVs, I recommend freight shipping with insurance. For CRT TVs, I provide special palletized shipping guidance.

Los Angeles County: LA Burbank Glendale Santa Monica Hollywood Pasadena

Nationwide: NY TX FL IL WA All 50 States

Authorized Bang & Olufsen Service ProviderBeovision Television SeriesComplete Restoration & Repair